You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
Home > Control Tower | SmartDNS > Windows > Windows Vista Setup for Privado Control Tower
Windows Vista Setup for Privado Control Tower
print icon

These setup instructions only need to be performed once. After initial setup, you’ll be able to use Privado Control Tower automatically.


1. Click on the Start Orb and select the Control Panel.


2. Select View network status and tasks from the Control Panel.


3. Click on View Status.


4. Click Properties button in the window.


5. If Vista asks for permission to make changes, click Continue.


6. Select Internet Protocol Version 4 (TCP/IPv4), then click the Properties button.


7. Select the radio button for “Use the following DNS server addresses”.


8. Enter the following IP addresses.

Preferred DNS server:

Alternate DNS server:


9.  Click on OK.


10. Restart your computer.

0 out of 0 found this helpful

scroll to top icon